Overall Under Coat-White

Price:

577.008,090.00

Finish:  

Matt


Coverage Area:  

14-18 (m²/Ltr/Coat)


Dry Time:  

30 Min - 2 Hours Dry to Recoat: 2-3 Hours


Clear
- +
Calculator
The Special Features tab content
TDS
Download
The Delivery Info tab content

Description

Diamond Overall Undercoat White is an excellent quality alkyd-based, non-absorbent, intermediate coat which gives maximum enamel hold-out and provides a smooth and tough surface. It is highly recommended for use on all interior and exterior surfaces like wood, metal, iron, cement etc.

Recommended use:

It is suitable for all wood and metal surfaces.

Surface Preparation:

Wood
Surface must be dry and free from dirt, grease and other contaminants. Smoothen the surface with sandpaper and then clean off and dry. The scraped areas should be primed by using an undercoat for wood surfaces. Light sanding on surface would ensure better subsequent intercoat adhesion.
Metal
Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust. Clean off dust and dry. The scraped areas should be primed using a primer for metal. Light sanding on surface would ensure better subsequent intercoat adhesion.

Finish : Matt
Tips:

Handle with care. Stir the contents thoroughly and apply evenly.

Additional information

Size

Quarter, Gallon, Drummy

Regions

, , , , , ,

Reviews

There are no reviews yet.

Be the first to review “Overall Under Coat-White”

Your email address will not be published. Required fields are marked *